The TCP window field in the TCP header is only 16 bits, so the maximum window size it can handle is only 64kb. A long time ago this was enough, but nowadays it isn’t, by far. Luckily, this is something the window scaling option fixes. Window scaling is very common these days. Your pc or laptop probably uses it by default. Snort’s stream4 however, does not support it. This means that when tracking and reassembling streams, Snort for most connections has no idea about what data is in window and which is out of window. To make matters worse, the packets that are in window when using wscaling, but appear out of window when the wscaling is not accounted for, are never used in the reassembly process. This makes Snort evadable.
One of the goals when creating the stream4inline modifications, was to be able to drop on all TCP anomalies stream4 detects. For this support for window scaling was added to Stream4, so Snort_inline would be able to drop out of window packets. There is however a big problem with window scaling. With window scaling the TCP window possibly increases to a maximum of 1GB (with the maximum wscale value of 14). Stream4 would thus theoretically have to queue up to 1GB of packet data, per stream. While this is something that is unlikely to happen during normal connections, it is possible. This could then be used by an attacker to attack Snort_inline itself.
To prevent this, I added an option to stream4inline that allows the administrator to set a maximum allowable wscale setting. Any higher setting will be normalized away. In these cases the packet is modified and the wscale lowered to the maximum that is allowed. The hosts talking to each other then think the other accepts only the lower wscale and accepts that setting. This can however have some unexpected consequences. If the link that Snort_inline deals with is high speed, high latency or both, setting the wscale value to low can result in serious performance degradation. Connections that are (way) slower than usual is how this issue shows. In these cases the wscale value needs to be increased.
The default value of Snort_inline 22.214.171.124 is a wscale of 2, which is quite low but works fine on my home DSL connection. To change the setting add ‘norm_wscale_max 5’ to your stream4 configuration line. This will allow for a wscale of up to 5. The maximum value is 14. I’d be interested in what values people use on what types and speeds of lines, so please let me know! We can use it to suggest values in the docs or to set a less insane default value 🙂